Rear Brake Pad Inspection
The extent of brake pads wear can be checked by
observing the grooved limit line "A" on the pads. When
the wear exceeds the grooved limit line, replace the
pads with new ones. Refer to "Rear Brake Pad
Replacement (Page 4C-2)".
CAUTION
!
Replace the brake pad as a set, otherwise
braking performance will be adversely
affected.
Rear Brake Pad Replacement
1) Remove the plug (1).
1
2) Remove the pad mounting pin (2).
3) Remove the caliper mounting bolt (3).
CAUTION
!
Do not operate the brake pedal while
dismounting the pads.
B817H24306002
4) Remove the brake pads with the rear caliper pivoted
up.
NOTE
When removing the pads, push the piston all
the way into brake caliper.
"A"
I717H1430001-01
B817H24306003
5) Clean up the caliper especially around the caliper
piston.
6) Assemble the new brake pad (4), insulator (5) and
shim (6).
CAUTION
!
Replace the brake pads as a set, otherwise
braking performance will be adversely
affected.
I717H1430002-01
Rear Brakes:
2
3
4
5
6
4C-2
I717H1430003-01
I717H1430004-01
I718H1430019-02