Engine Electrical Devices
Engine
Precautions for Engine Electrical Device
Refer to "General Precautions in Section 00 (Page 00-1)" and "Precautions for Electrical Circuit Service in Section 00
(Page 00-2)".
Engine Electrical Components Location
Refer to "Electrical Components Location in Section 0A (Page 0A-7)".
Engine Symptom Diagnosis
Refer to "Engine Symptom Diagnosis in Section 1A (Page 1A-7)".
ECM Removal and Installation
Removal
1) Remove the seat. Refer to "Exterior Parts Removal
and Installation in Section 9D (Page 9D-5)".
2) Remove the battery (–) lead wire.
3) Disconnect the ECM couplers (1) and remove the
ECM (2).
2
1
Installation
Install the ECM in the reverse order of removal.
CKP Sensor Inspection
Refer to "CKP Sensor Inspection in Section 1H
(Page 1H-8)".
Precautions
Component Location
Diagnostic Information and Procedures
Repair Instructions
B940H21306001
I940H1130001-01
B940H21306002
Engine Electrical Devices:
CKP Sensor Removal and Installation
Removal
1) Remove the generator cover. Refer to "Generator
Removal and Installation in Section 1J (Page 1J-5)".
2) Remove the CKP sensor (1) along with generator
starter.
Installation
Install the CKP sensor in the reverse order of removal.
Refer to "Generator Removal and Installation in Section
1J (Page 1J-5)".
IAP Sensor Inspection
Refer to "DTC "C13" (P1750) or "C17" (P0105): IAP
Sensor Circuit Malfunction in Section 1A (Page 1A-29)".
1C-1
B940H21300001
B940H21303001
B940H21304001
B940H21306003
1
I940H1130002-01
B940H21306004