Final Gear Construction; Final Gear Assembly Removal And Installation - Suzuki Intruder VZ1500 Service Manual

3A-12 Drive Chain / Drive Train / Drive Shaft:

Final Gear Construction

FWD
(a)
1. Shims
2. Shims
3. Shims
4. Final drive bevel gear

Final Gear Assembly Removal and Installation

Removal
1) Drain final gear oil. Refer to "Final Gear Oil
Replacement in Section 0B (Page 0B-10)".
2) Remove the rear wheel. Refer to "Rear Wheel
Assembly Removal and Installation in Section 2D
(Page 2D-10)".
3) Remove the swingarm pivot cover (1).
1
1
(b)
5. Final driven bevel gear
: 40 N⋅m (4.0 kgf-m, 29.0 lbf-ft)
: 100 N⋅m (10.0 kgf-m, 72.5 lbf-ft)
: Apply grease.
B940H23106009
I940H1310054-01
4
: Apply bond to matching surface.
: Apply bond to matching surface.
: Do not reuse.
4) Remove the final gear case pivot bolt (2) and swing
arm cover (3).
5) Remove the final gear case nut and washer.
6) Remove the final gear case (4) backward.
B940H23106008
3
5
2
I822H1310041-05
2
3
I940H1310001-02
4
I940H1310002-02