Headlight Bulb Replacement - Suzuki Intruder VZ1500 Service Manual

5) Remove the headlight unit (4).
Installation
Install the headlight in the reverse order of removal. Pay
attention to the following points:
CAUTION
!
Protect the part "A" of the speedometer
assembly and headlight cover with a tape to
prevent damage.
• Install the headlight assembly as shown.
"A"
• Rotate the headlight assembly as shown. Next fit the
headlight assembly and brace.
4
I940H1920003-03
"A"
I940H1920039-04
"A"
"A"
I940H1920040-03
• Tighten the bolts (1) to the specified torque.
Tightening torque
Headlight cover mounting bolt (a): 8.5 N·m (0.85
kgf-m, 6.0 lbf-ft)
1
(a)
• After installing, be sure to inspect the headlight beam.
Refer to "Headlight Beam Adjustment (Page 9B-4)".

Headlight Bulb Replacement

CAUTION
!
When you touch the bulb with your bare
hands, clean the bulb with a cloth moistened
with alcohol or soap water to prevent
premature bulb failure.
1) Disconnect the headlight coupler (1).
2) Remove the bulb socket rubber cap (2).
2
Lighting Systems: 9B-3
1
(a)
I940H1920041-02
B940H29206004
1
I940H1920004-01
I940H1920005-01