Front Wheel Assembly Construction; Front Wheel Assembly Removal And Installation - Suzuki Intruder VZ1500 Service Manual

Front Wheel Assembly Construction

1
1. Brake disc bolt
2. Brake caliper mounting bolt
3. Front axle pinch bolt

Front Wheel Assembly Removal and Installation

Removal
1) Raise the front wheel off the ground and support the
motorcycle with a jack or a wooden block.
CAUTION
!
Do not carry out the work with the
motorcycle resting on the side-stand. Make
sure that the motorcycle is supported
securely.
2) Remove the brake calipers. Refer to "Front Brake
Caliper Removal and Installation in Section 4B
(Page 4B-3)"
LH
(a)
(b)
3
(a)
" a "
"a": Clearance
: 23 N⋅m (2.3 kgf-m, 16.5 lbf-ft)
: 100 N⋅m (10.0 kgf-m, 72.5 lbf-ft)
B940H22406003
RH
2
1
: 39 N⋅m (3.9 kgf-m, 28.0 lbf-ft)
: Apply grease.
: Apply thread lock to the thread part.
CAUTION
!
Do not operate the brake lever while
removing the caliper.
Wheels and Tires: 2D-3
B940H22406002
(c)
(a)
I940H1240042-05
I940H1240003-01