Suzuki Intruder VZ1500 Service Manual page 258

1D-69 Engine Mechanical:
Gearshift System
• Apply thread lock to the gearshift arm stopper (1) and
tighten it to the specified torque.
: Thread lock cement 99000–32030
(THREAD LOCK CEMENT SUPER 1303 or
equivalent)
Tightening torque
Gearshift arm stopper (a): 19 N·m (1.9 kgf-m, 13.5
lbf-ft)
• Install the gearshift cam stopper (2), bolt (3), washer
(4) and return spring (5).
• Apply thread lock to the gearshift cam stopper bolt (3)
and tighten it to the specified torque.
: Thread lock cement 99000–32110
(THREAD LOCK CEMENT SUPER 1322 or
equivalent)
NOTE
Hook the return spring end "A" to the
stopper (1).
Tightening torque
Gearshift cam stopper bolt (b): 10 N·m (1.0 kgf-
m, 7.0 lbf-ft)
5
4
1
(a)
I940H1140235-01
3
2
I940H1140236-02
"A"
• Check the gearshift cam stopper moves smoothly.
• Locate the gearshift cam in the neutral position.
• Install the gearshift cam stopper plate (6).
NOTE
Align the gearshift cam pin "B" with the
gearshift cam stopper plate hole "C".
"C"
6
• Apply thread lock to the gearshift cam stopper plate
bolt (7) and tighten it to the specified torque.
: Thread lock cement 99000–32110
(THREAD LOCK CEMENT SUPER 1322 or
equivalent)
Tightening torque
Gearshift cam stopper plate bolt (c): 10 N·m (1.0
kgf-m, 7.0 lbf-ft)
3
(b)
I940H1140320-01
"B"
I940H1140238-01
7
(c)
I940H1140239-01