Rear Brake Pad Inspection; Rear Brake Pad Replacement - Suzuki VLR1800 Service Manual

Rear Brake Pad Inspection

The extent of brake pads wear can be checked by
observing the grooved limit line "A" on the pads. When
the wear exceeds the grooved limit line, replace the
pads with new ones. Refer to "Rear Brake Pad
Replacement (Page 4C-2)".
CAUTION
!
Replace the brake pad as a set, otherwise
braking performance will be adversely
affected.

Rear Brake Pad Replacement

1) Remove the caliper bracket mounting bolt (1).
CAUTION
!
Do not operate the brake pedal while
dismounting the pads.
2) Remove the pads mounting pin (2) by removing the
B822H14306002
3) Remove the brake pads (4).
"A"
I822H1430001-05
B822H14306003
4) Clean up the caliper, especially around the caliper
5) Assemble the new brake pads (4), insulator (5) and
1
I822H1430002-01
clip (3).
3
4
piston.
shim (6).
CAUTION
!
Replace the brake pads as a set, otherwise
braking performance will be adversely
affected.
6
4
Rear Brakes: 4C-2
2
I822H1430003-01
I822H1430004-01
5
6
I822H1430005-02