Front Wheel Related Parts Inspection - Suzuki Intruder VZ1500 Service Manual

4) Tighten the front axle (3) to the specified torque with
the special tool.
Special tool
(A): 09900–18740 (Hexagon socket (24
mm))
Tightening torque
Front axle (b): 100 N·m (10.0 kgf-m, 72.5 lbf-ft)
5) Move the front fork up and down 4 or 5 times.
6) Tighten the axle pinch bolt (4) on the left front fork
leg to the specified torque.
Tightening torque
Front axle pinch bolt (c): 23 N·m (2.3 kgf-m, 16.5
lbf-ft)
4
(c)
3
(b)
(A)
I940H1240011-04
I940H1220007-01
I940H1240013-02

Front Wheel Related Parts Inspection

Refer to "Front Wheel Assembly Removal and
Installation (Page 2D-3)".
Tire
Refer to "Tire Inspection in Section 0B (Page 0B-16)".
Front Brake Disc
Refer to "Front Brake Disc Inspection in Section 4B
(Page 4B-7)".
Dust Seal
Inspect the dust seal lips for wear or damage. If any
defects are found, replace the dust seal with the new
ones. Refer to "Front Wheel Dust Seal / Bearing
Removal and Installation (Page 2D-6)".
Wheel Axle
Using a dial gauge, check the wheel axle for runout. If
the runout exceeds the limit, replace the front axle.
Special tool
(A): 09900–20607 (Dial gauge (1/100 mm, 10
mm))
(B): 09900–20701 (Magnetic stand)
(C): 09900–21304 (V-block (100 mm))
Wheel axle runout
Service limit: 0.25 mm (0.010 in)
(A)
(C)
Wheels and Tires: 2D-5
B940H22406004
I940H1240014-01
(B)
I649G1240054-02