Suzuki Intruder VZ1500 Service Manual page 420

3A-6 Drive Chain / Drive Train / Drive Shaft:
9) Remove the oil seal with the special tool.
Special tool
(C): 09913–50121 (Oil seal remover)
(C)
10) Remove the bearing (11).
Special tool
(D): 09913–70210 (Bearing installer set)
Assembly
NOTE
Bearing installing the gears, apply engine oil
to the rotating parts.
1) Install the bearing with the special tool.
CAUTION
!
The removed bearing must be replaced with a
new one.
NOTE
When installing the bearing, stamped mark
on the bearing must face outside.
Special tool
(A): 09913–70210 (Bearing installer set)
2) Install the oil seal with the special tool.
I940H1310035-01
(D)
11
I940H1310036-03
CAUTION
!
The removed oil seal must be replaced with a
new one.
Special tool
(A): 09913–70210 (Bearing installer set)
(B): 09924–74520 (Oil seal installer/
remover)
(A)
I940H1310037-01
I940H1310038-03
(A)
(B)
I940H1310039-01