Rear Brake Pad Inspection; Rear Brake Pad Replacement - Suzuki GSX-R600 Manual

Rear Brake Pad Inspection

The extent of brake pads wear can be checked by
observing the grooved limit line "A" on the pads. When
the wear exceeds the grooved limit line, replace the
pads with new ones. Refer to "Rear Brake Pad
Replacement (Page 4C-2)".
CAUTION
!
Replace the brake pad as a set, otherwise
braking performance will be adversely
affected.

Rear Brake Pad Replacement

1) Remove the pad mounting pin (1).
2) Remove the caliper mounting bolt (2).
CAUTION
!
Do not operate the brake pedal while
dismounting the pads.
1
B837H14306002
"A"
I837H1430001-01
B837H14306003
2
I837H1430002-01
3) Remove the brake pads (3) with the rear caliper
pivoted up.
NOTE
When removing the pads, push the piston all
the way into brake caliper.
3
4) Clean up the caliper, especially around the caliper
piston.
CAUTION
!
Replace the brake pads as a set, otherwise
braking performance will be adversely
affected.
5) Install the new brake pads.
NOTE
Make sure that the detent of the pad is seated
onto the retainer on the caliper bracket.
Rear Brakes: 4C-2
I837H1430003-01
I837H1430004-01
I837H1430005-01