Suzuki Intruder VZ1500 Service Manual page 248

1D-59 Engine Mechanical:
9) Remove the needle roller bearing (12), spacer (13)
and washer (14).
Primary Drive Gear
Remove the primary drive gear (1). Refer to "Primary
Drive Gear Removal and Installation in Section 5C
(Page 5C-13)".
CAUTION
!
The primary drive gear bolt (2) has left-hand
threads.
1
Rear Cam Chain / Rear Cam Chain Drive Sprocket
1) Remove the rear cam chain tensioner (1).
2) Remove the cam chain (2).
3) Remove the cam chain guide bolt (3).
4) Remove the cam chain drive sprocket (4).
1
14
12
13
I940H1140185-03
2
I940H1140186-02
2
3
4
I940H1140187-01
Oil Pump Drive Gear / Oil Pressure Regulator
1) Remove the oil pressure regulator (1).
2) Remove the snap ring (2) and oil pump driven gear
(3).
NOTE
Do not drop the snap ring (2) into the
crankcase.
Special tool
: 09900–06107 (Snap ring pliers)
2
3) Remove the pin (4) and washer (5).
4
Gearshift System
1) Remove the snap ring (1) and washer (2).
2
1
3
I940H1140191-02
5
I940H1140192-01
1
I940H1140188-01