Rear Wheel Assembly Construction; Rear Wheel Assembly Removal And Installation - Suzuki Intruder VZ1500 Service Manual

2D-10 Wheels and Tires:

Rear Wheel Assembly Construction

1. Brake disc bolt
"a": Clearance
: 23 N⋅m (2.3 kgf-m, 16.5 lbf-ft)

Rear Wheel Assembly Removal and Installation

Removal
1) Support the motorcycle with the jack or wooden
block.
2) Remove the rear brake caliper. Refer to "Rear Brake
Caliper Removal and Installation in Section 4C
(Page 4C-3)".
CAUTION
!
Do not operate the brake pedal while
removing the caliper.
NOTE
It is unnecessary to disengage the brake
hose from the caliper.
LH
" a "
: 100 N⋅m (10.0 kgf-m, 72.5 lbf-ft)
: Apply thread lock to the thread part.
: Apply thread lock to the thread part.
3) Remove the brake caliper bracket mounting bolt (1).
B940H22406008
RH
(b)
1
(a)
: Apply grease.
B940H22406007
I940H1240044-04
1
I940H1240022-01