Table of Contents
Advertisement
1D-31 Engine Mechanical:
Rocker Arm (#2 Cylinder)
CAUTION
!
Be sure to identify each removed part as to
its location, and lay the parts out in groups
designated as "Exhaust", "Intake", so that
each will be restored to the original location
during assembly.
1) Remove the rocker arm shaft (1).
2) Remove the each rocker arm (2) and wave washer
(3).
3
3
Cylinder Head (#2 Cylinder)
1) Remove the front cylinder head.
NOTE
Loosen the cylinder head bolts little by little
diagonally with the smaller sizes first.
1
2
2
I940H1140068-01
I940H1140064-02
2) Remove the front cylinder head gasket (1) and dowel
pins.
Front Cylinder (#2 Cylinder)
1) Remove the cam chain guide (1) and front cylinder
(2).
NOTE
Firmly grip the cylinder at both ends, and lift
it straight up. If the cylinder does not come
off, lightly tap on the finless portions of the
cylinder with a plastic hammer.
2
2) Remove the front cylinder gasket (3) and dowel pins.
3
1
I940H1140065-02
1
I940H1140066-03
I940H1140067-02
Advertisement
Chapters
Table of Contents
