Secondary Driven Gear Disassembly And Assembly - Suzuki Intruder VZ1500 Service Manual

Secondary Driven Gear Disassembly and
Assembly
Refer to "Secondary Driven Gear Assembly Removal
and Installation (Page 3A-3)".
Disassembly
1) Remove the shims (1).
2) Unlock the nut with a chisel.
3) Remove the driven bevel gear coupling nut with the
special tool.
Special tool
(A): 09924–64510 (Final driving gear
coupling holder)
4) Remove the washer (2) and driven bevel gear
coupling (3).
2
5) Remove the following parts from the shaft (4).
• Secondary shaft spacer (5)
B940H23106004
• Bearing housing (6)
• Secondary driven bevel gear spacer (7)
• Secondary driven bevel gear (8)
1
6) Remove the oil seal (9).
I940H1310029-01
(A)
7) Unlock the secondary driven bearing stopper (10).
8) Remove the secondary driven bearing stopper (10)
with the special tool.
Special tool
I940H1310030-01
3
I940H1310031-01
Drive Chain / Drive Train / Drive Shaft:
4
8
7
(B): 09924–41830 (Bearing retainer wrench)
10
3A-5
6
5
I940H1310032-01
9
I940H1310033-01
(B)
I940H1310034-01