Final Gear Disassembly And Assembly - Suzuki Intruder VZ1500 Service Manual

3A-14 Drive Chain / Drive Train / Drive Shaft:
6) Install the rear wheel assembly. Refer to "Rear
Wheel Assembly Removal and Installation in Section
2D (Page 2D-10)".
7) Pour final gear oil. Refer to "Final Gear Oil
Replacement in Section 0B (Page 0B-10)".

Final Gear Disassembly and Assembly

Refer to "Final Gear Assembly Removal and Installation
(Page 3A-12)".
Disassembly
1) Remove the stopper plate (1).
2) Remove the dust seal (2).
3) Remove the snap ring (3) with the special tool.
Special tool
: 09900–06108 (Snap ring pliers)
B940H23106010
1
I822H1310047-01
2
I822H1310048-01
3
I822H1310049-01
4) Remove the propeller shaft (4) and spring (5).
5
4
5) Unlock the final drive gear coupling nut with a chisel.
6) Remove the final drive gear coupling nut with the
special tools.
Special tool
(A): 09924–62430 (Long socket (22 mm))
Special tool
(B): 09924–64510 (Final driving gear
coupling holder)
7) Remove the washer (6) and final drive gear coupling
(7).
I822H1310050-01
(B)
(A)
I822H1310051-01
7
6
I822H1310052-01