Engine Bottom Side Assembly - Suzuki GSX1300R Manual

1D-71 Engine Mechanical:
Oil Gallery Plug
1) Remove the oil gallery plug (M6) (1), (M14) (2),
(M14) (3) and (M6) (4) from the upper crankcase.
2
1
I823H1140198-01
3
I823H1140199-01
4
I823H1140200-01
2) Remove the oil gallery plugs (M6) (5), (M8) (6),
(M10) (7), (M6) (8) and (M16) (9) from the lower
crankcase.
7
6
Bearing
Remove the bearings if necessary. Refer to "Gearshift
Shaft Oil Seal / Bearing Removal and Installation in
Section 5B (Page 5B-17)".

Engine Bottom Side Assembly

Assemble the engine bottom side in the reverse order of
disassembly. Pay attention to the following points:
NOTE
Apply engine oil to each running and sliding
part before reassembling.
Oil Seal / Bearing
• Install the oil bearings. Refer to "Gearshift Shaft Oil
Seal / Bearing Removal and Installation in Section 5B
(Page 5B-17)".
Oil Gallery Plug
• Tighten each plug to the specified torque.
CAUTION
!
Replace the gaskets with new ones.
5
I823H1140201-01
8
9
I823H1140202-01
B815H21406036