STMicroelectronics STM32F405 Reference Manual page 1721

RM0090
Date
16-Mar-2015
Table 310. Document revision history (continued)
Version
PWR:
Updated Section 5.1.2: Battery backup
Updated Table 23: Low-power mode summary
ISR as entry condition.
Added Section : Entering low-power mode
power mode.
Updated Section : Entering Sleep
mode, Table 24: Sleep-now entry and exit
exit entry and
Updated Section : Entering Stop mode (for STM32F405xx/07xx and
STM32F415xx/17xx),
STM32F405xx/07xx and STM32F415xx/17xx)
mode entry and exit (for STM32F405xx/07xx and
STM32F415xx/17xx). Updated
(STM32F42xxx and
(STM32F42xxx and STM32F43xxx)
and exit (STM32F42xxx and
Updated Section : Entering Standby
mode and Table 30: Standby mode entry and
RCC:
Updated bits 24 to 31 access type in
control & status register
9
GPIOs:
Added port A reset value in
register (GPIOx_OSPEEDR) (x =
DMA:
Update FTH[1:0] description in
control register (DMA_SxFCR) (x =
TIM2/5:
Register format changed to 32 bits instead of 16 in
TIMx counter (TIMx_CNT)
register (TIMx_ARR).
TIM9 to 14:
Updated Table 100: TIMx internal trigger connection
WWDG:
Updated Figure 214: Watchdog block diagram
How to program the watchdog
Updated Figure 215: Window watchdog timing diagram
RNG:
Replaced PLL48CLK by RNG_CLK in the whole section.
DocID018909 Rev 11
Changes
mode,
exit.
Section : Exiting Stop mode (for
Section : Entering Stop mode
STM32F43xxx), Section : Exiting Stop mode
and
STM32F43xxx).
mode,
Section 7.3.22: RCC clock
(RCC_CSR).
Section 8.4.3: GPIO port output speed
A..I/J/K).
Section 10.5.10: DMA stream x FIFO
0..7).
and Section 18.4.12: TIMx auto-reload
timeout.
Revision history
domain.
to add Return from
and Section : Exiting low-
Section : Exiting Sleep
and Table 25: Sleep-on-
and Table 27: Stop
Table 29: Stop mode entry
Section : Exiting Standby
exit.
Section 18.4.10:
and Section 22.4:
1721/1731
1726