Adjust Paper Regi - Fuji Xerox DocuPrint 5105 d User Manual

[Image Quality]
Adjusts the printer when print quality is poor.

[Adjust Paper Regi]

Note
• Tray 3, Tray 4, and Tray 6 are optional.
• The [Adjust Side 1], [Adjust Side 2], [PrintChart-1Sided], and [PrintChart-2Sided] options are displayed in each
case when Tray 1 to 4, Tray 5, or Tray 6 is selected.
• For more information on adjusting paper regi, refer to "7.12 Adjusting the Paper Regi" (P. 356).
• Vertical adjustment (Adjust Lead Regi) can be set per tray, however, all the values become the same.
Adjust Side 1
Adjust Side 2
PrintChart-1Sided
PrintChart-2Sided
206
5 Control Panel Settings
Adjust image
Adjust Paper Regi
Setting
Adjusts the print position of Side 1 in vertical direction (Lead Regi) and
horizontal direction (Side Regi).
• You can set the value between -2.0 mm to +2.0 mm, with 0.5mm
Adjusts the print position of Side 2 in vertical direction (Lead Regi) and
holizontal direction (Side Regi).
• You can set the value between -2.0 mm to +2.0 mm, with 0.5mm
Exports the chart for adjusting a print position of Side 1 in vertical
direction (Lead Regi) and holizontal direction (Side Regi).
Exports the chart for adjusting a print position of Side 2 in vertical
direction (Lead Regi) and holizontal direction (Side Regi).
Adjust Paper Regi
Tray 1
Adjust Paper Regi
Tray 2
Adjust Paper Regi
Tray 3
Adjust Paper Regi
Tray 4
Adjust Paper Regi
Tray 5
Adjust Paper Regi
Tray 6
Description
increments towards the plus (
increments towards the plus (
Tray 1
Adjust Side 1
Tray 1
Adjust Side 2
Tray 1
PrintChart-1Sided
Tray 1
PrintChart-2Sided
) or minus ( ) side.
) or minus ( ) side.