Paper Jams In C3 Finisher / C3 Finisher With Booklet Maker - Fuji Xerox ApeosPort-VII C7788 Quick Reference

Paper Jams in C3 Finisher / C3 Finisher with Booklet Maker

The following describes how to clear paper jams inside the finisher when the C3 Finisher
(optional) or the C3 Finisher with Booklet Maker (optional) is installed.
Note
Remedy differs depending on where the paper jam occurs. Follow the instructions displayed and remove the
jammed paper.
Paper Jams at the Handle [3a]
1
Open the finisher front door.
2
Move the handle [3a] upwards (1), and remove the jammed paper (2).
Note
If paper is torn, check for any torn pieces of paper inside the device.
3
Return the handle [3a] to its original position.
4
Close the finisher front door.
Note
If the finisher front door is not completely closed, a message will appear and the device remains paused.
Paper Jams
181