Replacing Stamp (For Duplex Automatic Document Feeder B1-Pc) - Fuji Xerox ApeosPort-IV C5575 Administration Manual

3
Stick the supplied pin into the old stamp
cartridge, and pull it straight out of the
machine.
Note
4
Insert the new stamp cartridge.
5
Close the inner cover of the document feeder.
6
Close the left cover of the document feeder until it clicks into place, and confirm that there
is no space between the near or far side of the cover and the document feeder.

Replacing Stamp (for Duplex Automatic Document Feeder B1-PC)

If the machine offers the Fax service and the Stamp Kit (optional) is installed, replace the
stamp cartridge when stamp impressions start to fade.
Important • Do not touch the ink pad of the stamp cartridge. If it comes into contact with your skin, wash
Note
1
Lift the document feeder gently, and open the
Side 2 scanner.
• If only the sponge part of the stamp
cartridge is removed, make sure of removing
the bottom part of the cartridge.
immediately.
• Problems caused by using consumables not recommended by Fuji Xerox are not covered by the
maintenance service contract.
• Before using consumables, carefully read instructions and precautions on their packages.
• We recommend always keeping spare consumables/periodic replacement parts in stock.
• To order consumables, contact our Customer Support Center.
(Product Name: Stamp Replacement Kit, Product Code: F451)
Replacing Consumables
85
3