Samsung S5PC100 User Manual page 1546

HDMI
3.102 TG COMMAND REGISTER (TG_CMD, R/W, ADDRESS = 0XF030_1000)
TG_CMD
Reserved
getsync_type
getsync_en
Reserved
field_en
tg_en
3.103 HORIZONTAL FULL SIZE (TG_H_FSZ_L, R/W, ADDRESS = 0XF030_ 1018)
TG_H_FSZ_L
TG_H_FSZ_L
3.104 HORIZONTAL FULL SIZE (TG_H_FSZ_H, R/W, ADDRESS = 0XF030_ 101C)
TG_H_FSZ_H
Reserved
TG_H_FSZ_H
3.105 HORIZONTAL ACTIVE START POSITION (TG_HACT_ST_L, R/W, ADDRESS = 0XF030_ 1020)
TG_HACT_ST_L
TG_HACT_ST_L
9.10-64
Bit
[7:5] Reserved
Timing correction enable bit. If this bit is set, the input vsync
timing error relative to output vsync is corrected.
[4]
0 = Disables
1 = Enables
[3] BT656 input synchronization enable
[2] Reserved
[1] Field mode enable. This should be 0
[0] TG global enable bit.
Bit
[7:0] Horizontal full size (1~8191) (Lower part)
Bit
[7:5] Reserved
[4:0] Horizontal full size (1~8191) (Upper part)
Bit
[7:0] Horizontal active start position (1~4095) (Lower part)
S5PC100 USER'S MANUAL (REV1.0)
Description
Description
Description
Description
Reset Value
000
0
0
0
0
0
Reset Value
0x72
Reset Value
0x0
0x6
Reset Value
0x05