Advertisement
Instrument Controls
Thermo Fisher Scientific
Events 1-32
The Events 1-32 screens allow the user to turn events on or off and modify
the calibrator's operational settings. These screens are similar to the
operation screen, but the numeric values cannot be changed, except
duration minutes. Duration minutes lets you set the duration of an event
and can be set by pressing
minutes. Press
8 allows the instrument to control the user configured digital outputs as
part of the event. When set to NONE, it will leave that event alone (it stays
the same as it was before the event started). If set ON, it will turn user
outputs on. If set OFF, it will turn outputs to off.
In the Main Menu, choose > Program > Events > Event 1-32.
●
Press
●
The Instrument Controls menu contains a number of items. The software
controls listed in this menu enable control of the listed instrument
Menu
functions.
In the Main Menu, choose Instrument Controls.
●
to save the value or
or
to toggle and
EVENT 10:
>ENABLED: ?
GAS A
?
SPAN 1
PHOT OFF
PERM OFF
OZONE OFF
USER1 DOUT
OPER
MODE
DIAGS ALARM
USER2 DOUT
USER3 DOUT
USER4 DOUT
USER5 DOUT
USER6 DOUT
USER7 DOUT
USER8 DOUT
and using
to leave the screen. User 1-
to set following items.
32
MIN
0.212 SCCM
2314 PPM
0 PPM
0 PPM
0 %
ON
OFF
NONE
NONE
NONE
NONE
NONE
NONE
Model 146i Instruction Manual
Operation
Instrument Controls Menu
enter a value in
3-39
Advertisement
Troubleshooting
