Advertisement
Thermo Fisher Scientific
Alarms
The Alarms status screen allows the user to select the alarm status for the
selected relay output. The selected item is shown by "<--" after it.
In the Main Menu, choose Instrument Controls > I/O Configuration >
●
Output Relay Settings > Select Relay > Instrument State > Alarms.
Non-Alarm
The Non-Alarm status screen allows the user to select the non-alarm status
for the selected relay output. The selected item is shown by "<--" after it.
For more information on the I/O connections, see
Interconnections" in the "Installation" chapter.
In the Main Menu, choose Instrument Controls > I/O Configuration >
●
Output Relay Settings > Select Relay > Instrument State > Non-Alarm.
ALARM STATUS ITEMS:
>NONE
GEN ALARM
AMBIENT TEMP
O3 LAMP TEMP
PERM GAS TEMP
PRESSURE
PHOT BENCH TEMP
OPER
MODE
DIAGS ALARM
PHOT LAMP TEMP
PHOT INTENSITY
O3 LEVEL
NON ALARM STATUS ITEMS:
>NONE
GAS BIT 1
GAS BIT 2
GAS BIT 3
SPAN BIT 1
SPAN BIT 2
SPAN BIT 3
OPER
MODE
DIAGS ALARM
O3/PERM BIT 1
O3/PERM BIT 2
O3/PERM BIT 3
O3/PERM BIT 4
PHOTO BIT 1
PHOTO BIT 2
GAS A
GAS B
GAS C
GAS D
GAS E
GAS F
Instrument Controls Menu
"Remote
<--
Model 146i Instruction Manual
Operation
3-57
Advertisement
Troubleshooting
