Advertisement
C-Link Protocol Commands
Measurement Configuration
B-34
Model 146i Instruction Manual
Send:
set man ozon zflow 1000
Receive:
set man ozon zflow 1000 ok
sel ozon level
This command selects the ozonator output levels 1, 2, 3, 4 or 5.
Send:
sel ozon 1
Receive:
sel ozon 1 ok
sel ozon level
set ozon level
This command selects the ozonator output levels 0, 1, 2, 3, 4, 5, or man. 0
shuts off the ozonator and man puts it into manual mode. The example
below sets the ozonator output level 1. This command is only available if
the ozonator option is installed.
Send:
sel ozon 1
Receive:
sel ozon 1 ok
sel ozon perm off
This command turns off the ozonator and permeation oven if these options
are present.
Send:
set ozon perm off
Receive:
set ozon perm off ok
perm
This command reports the current permeation oven output level, where 0
is off. This command is only available if the permeation oven option is
installed.
Send:
perm
Receive:
perm 1
sel perm index
set perm index
index = 0-5
This command selects preset permeation oven levels to index. This
command is only available if the permeation oven option is installed.
Send:
sel perm 1
Receive:
set perm 1 ok
set o3 conc value
Thermo Fisher Scientific
Advertisement
Troubleshooting
