Restore User Defaults; Password; Set Password - Thermo Scientific 146i Instruction Manual

Restore User

Password

Set Password

Thermo Fisher Scientific
The Restore User Defaults screen is used to reset the user calibration and
configuration values to factory defaults. The restore default user is visible
Defaults
only when the instrument is in service mode. For more information on the
service mode, see
In the Main Menu, choose Service > Restore User Defaults.
●

RESTORE USER DEFAULTS:

OPER MODE DIAGS ALARM
The Password menu allows the user to configure password protection. If
the instrument is locked, none of the settings may be changed via the front
panel user interface. The items visible under the password menu are
determined by the instrument's password status.
In the Main Menu, choose Password.
●
The Set Password screen is used to set the password to unlock the front
panel. The set password is shown if the instrument is unlocked and the
password is set.
In the Main Menu, choose Password > Set Password.
●
"Service Mode" earlier in the chapter.
RESTORE
PASSWORD MENU:
>SET PASSWORD
LOCK INSTRUMENT
CHANGE PASSWORD
REMOVE PASSWORD
UNLOCK INSTRUMENT
OPER MODE DIAGS ALARM
RESTORE USER DEFAULTS:
ARE YOU SURE YOU WANT
PRESS TO CONFIRM RESTORE
OPER MODE DIAGS ALARM
Model 146i Instruction Manual
Operation
Password
RESTORE
TO?x
3-103