Advertisement
Operation
Software Overview
Software
Overview
3-4
Model 146i Instruction Manual
Note Not all menu items may be assigned to soft keys. If a particular menu
or screen item cannot be assigned, the key assignment screen will not come
up upon entering right-arrow-soft key combinations. All items under the
Service menu (including the menu itself) cannot be assigned soft keys.
EDIT SOFT KEY PROMPT:
CURRENTLY:OPER
ABCDEFGHIJKLMN
OPQRSTUVWXYZ
0123456789 ./-
OPER
MODE
The Model 146i utilizes the menu-driven software as illustrated by the
flowchart in
Figure
3–3. The Power-Up screen, shown at the top of the
flowchart, is displayed while the instrument is warming up and performing
self-checks. After the warm-up period, the Run screen is automatically
displayed. From the Run screen, the Main Menu can be displayed by
pressing
. The Main Menu contains a list of submenus. Each
submenu contains related instrument controls and settings. This chapter
describes each submenu and screen in detail. Refer to the appropriate
sections for more information.
OPER
BKSP
PAGE
SAVE
DIAGS ALARM
▲
Thermo Fisher Scientific
Advertisement
Troubleshooting
