Contact Information; Alarms Menu - Thermo Scientific 146i Instruction Manual

Contact Information

Alarms Menu

Thermo Fisher Scientific
INSTRUMENT CONFIGURATION:
>I/O EXPANSION BOARD
GAS VALVES
OZONATOR
PHOTOMETER
PERMEATION OVEN
OPER MODE
The Contact Information screen displays the customer service information.
In the Main Menu, choose Diagnostics > Contact Information.
●
CONTACT INFORMATION:
CALL CENTER: 508-520-0430
WEB:
OPER MODE
The Alarms menu displays a list of items that are monitored by the
instrument. If the item being monitored goes outside the lower or upper
limit, the status of that item will go from "OK" to either "LOW" or
"HIGH", respectively. If the alarm is not a level alarm, the status will go
from "OK" to "FAIL". The number of alarms detected is displayed to
indicate how many alarms have occurred. If no alarms are detected, the
number zero is displayed.
To see the actual reading of an item and its minimum and maximum
limits, move the cursor to the item and press
Items displayed are determined by the options installed. The motherboard
status, interface board status, and I/O Expansion board status (if installed)
indicate that the power supplies are working and connections are
successful. There are no setting screens for these alarms.
In the Main Menu, choose Alarms.
●
YES
6
YES
NO
NO
DIAGS ALARM
WWW.THERMO.COM
DIAGS ALARM
Model 146i Instruction Manual
Operation
Alarms Menu
.
3-77