Advertisement
Operation
Instrument Controls Menu
3-66
Model 146i Instruction Manual
Descriptor
The Descriptor screen allows the user to enter the descriptor for the
selected analog input channel. The descriptor is used in datalogging and
streaming data to report what data is being sent out. The descriptor may be
from 1 to 3 characters in length, and defaults to IN1 to IN8 (user input
channel number).
In the Main Menu, choose Instrument Controls > I/O Configuration >
●
Analog Input Config > Select Channel > Descriptor.
Units
The Units screen allows the user to enter the units for the selected analog
input channel. The units are displayed on the diagnostic screen and in
datalogging and streaming data. The units may be from 1 to 3 characters in
length, and defaults to V (volts).
In the Main Menu, choose Instrument Controls > I/O Configuration >
●
Analog Input Config > Select Channel > Units.
ANALOG INPUT 01 CONFIG:
>DESCRIPTOR
UNITS
DECIMAL PLACES
TABLE POINTS
TABLE POINT 1
TABLE POINT 2
OPER
MODE
DIAGS ALARM
ANALOG INPUT DESCRIPTOR:
CURRENTLY: IN1
IN1
ABCDEFGHIJKLMN
OPQRSTUVWXYZ
0123456789 ./-
OPER
MODE
DIAGS ALARM
IN1
V
2
2
BKSP
PAGE
SAVE
Thermo Fisher Scientific
Advertisement
Troubleshooting
