Connection; Table 8-1. Rs-232 Db Connector Pin Configuration; Table 8-2. Rs-485 Db Connector Pin Configuration - Thermo Scientific 146i Instruction Manual

System Description
I/O Components
RS-232 Connection
RS-485 Connection
8-14 Model 146i Instruction Manual
A null modem (crossed) cable is required when connecting the analyzer to
an IBM Compatible PC. However, a straight cable (one to one) may be
required when connecting the analyzer to other remote devices. As a general
rule, when the connector of the host remote device is female, a straight cable
is required and when the connector is male, a null modem cable is required.
Data Format:
1200, 2400, 4800, 9600, 19200, 38400, 57600, or 115200 BAUD
8 data bits
1 stop bit
no parity
All responses are terminated with a carriage return (hex 0D)
Refer to Table 8-1
Table 8-1. RS-232 DB Connector Pin Configurations
DB9 Pin Function
2 RX
3 TX
7 RTS
8 CTS
5 Ground
The instrument uses a four wire RS-485 configuration with automatic flow
control (SD). Refer to

Table 8-2. RS-485 DB Connector Pin Configuration

DB9 Pin Function
2 + receive
8 - receive
7 + transmit
3 - transmit
5 ground
for the DB9 connector pin configuration.
Table 8-2 for the DB9 connector pin configuration.
Thermo Fisher Scientific