Advertisement
Operation
Instrument Controls Menu
Instrument State
3-56
Model 146i Instruction Manual
Logic State
The Logic State screen is used to change the I/O relay to either normally
open or normally closed.
Press
●
The Instrument State menu allows the user to select the instrument state
that is tied to the selected relay output. A submenu lists signal types of
either alarm or non-alarm to choose from.
In the Main Menu, choose Instrument Controls > I/O Configuration >
●
Output Relay Settings > Select Relay > Instrument State.
OUTPUT RELAY SETTINGS:
>1
NOP
2
NOP
3
NOP
4
NOP
5
NOP
6
NOP
7
NOP
O3/PERM BIT 1
OPER
MODE
DIAGS ALARM
to toggle and set the logic state open or closed.
OUTPUT RELAY SETUP:
>LOGIC STATE
INSTRUMENT STATE
OPER
MODE
DIAGS ALARM
CHOOSE SIGNAL TYPE:
>ALARMS
NON-ALARM
OPER
MODE
DIAGS ALARM
GAS BIT 1
GAS BIT 2
GAS BIT 3
SPAN BIT 1
SPAN BIT 2
SPAN BIT 3
OPEN
Thermo Fisher Scientific
Advertisement
Troubleshooting
