Download Print this page

Thermo Scientific 146i Instruction Manual page 7

Dynamic gas calibrator

Advertisement

FCC Compliance
Thermo Fisher Scientific
Safety and Equipment Damage Alerts in this Manual, continued
Alert
CAUTION
Equipment Damage
WARNING Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user's authority to
operate the equipment.
Note This equipment has been tested and found to comply with the limits
for a Class A digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in
which case the user will be required to correct the interference at his own
expense.
Description
If the LCD panel breaks, do not to let the liquid crystal
contact your skin or clothes. If the liquid crystal contacts
your skin or clothes, wash it off immediately using soap
and water.
Do not attempt to lift the analyzer by the cover or other
external fittings.
Some internal components can be damaged by small
amounts of static electricity. A properly grounded
antistatic wrist strap must be worn while handling any
internal component.
This adjustment should only be performed by an
instrument service technician.
Handle all printed circuit boards by the edges only.
Do not remove the panel or frame from the LCD module.
The LCD module polarizing plate is very fragile, handle it
carefully.
Do not wipe the LCD module polarizing plate with a dry
cloth, it may easily scratch the plate.
Do not use Ketonics solvent or aromatic solvent to clean
the LCD module, use a soft cloth moistened with a
naphtha cleaning solvent.
Do not place the LCD module near organic solvents or
corrosive gases.
Do not shake or jolt the LCD module.
Model 146i Instruction Manual
Preface
iii

Advertisement

loading