Advertisement
Operation
Instrument Controls Menu
Instrument State
3-60
Model 146i Instruction Manual
Logic State
The Logic State screen is used to change the I/O solenoid to either
normally open or normally closed.
Press
●
The Instrument State menu allows the user to select the instrument state
that is tied to the selected solenoid output. A submenu lists signal types of
either alarm or non-alarm to choose from.
In the Main Menu, choose Instrument Controls > I/O Configuration >
●
Ext Solenoid Settings > Select Solenoid > Instrument State.
EXT SOLENOID SETTINGS:
>1
NOP
2
NOP
3
NOP
4
NOP
5
NOP
6
NOP
7
NOP
OPER
MODE
DIAGS ALARM
to toggle and set the logic state open or closed.
EXT SOLENOID SETUP:
>LOGIC STATE
INSTRUMENT STATE
OPER
MODE
DIAGS ALARM
CHOOSE SIGNAL TYPE:
>ALARMS
NON-ALARM
OPER
MODE
DIAGS ALARM
GAS A
GAS B
GAS C
GAS D
GAS E
GAS F
OZONATOR
OPEN
Thermo Fisher Scientific
Advertisement
Troubleshooting
