Relay States; Solenoid States; Test Analog Outputs - Thermo Scientific 146i Instruction Manual

Relay States

Solenoid States

Test Analog Outputs

Thermo Fisher Scientific
The Relay States screen displays the state of the 10 digital outputs and
allows toggling of the state to either on (1) or off (0). The relays are
restored to their original states upon exiting this screen.
In the Main Menu, choose Diagnostics > Relay States.
●
RELAY STATE:
>OUTPUT
OUTPUT
OUTPUT
OUTPUT
OUTPUT
OUTPUT
OUTPUT
OPER MODE
The Solenoid State screen displays the state of the 10 digital outputs and
allows toggling of the state to either on (1) or off (0). The solenoids are
restored to their original states upon exiting this screen.
In the Main Menu, choose Diagnostics > Solenoid States.
●
SOLENOID STATE:
>SOLENOID
SOLENOID
SOLENOID
SOLENOID
SOLENOID
SOLENOID
SOLENOID
OPER MODE
The Test Analog Outputs menu contains a number of digital to analog
converter (DAC) calibration items. Channel choices include all analog
outputs, 6 voltage channels, and 6 current channels (if the I/O expansion
board option is installed).
In the Main Menu, choose Diagnostics > Test Analog Outputs.
●
1 0
2 0
3 0
4 1
5 0
6 0
7 0
DIAGS ALARM
1 1
2 0
3 0
4 0
5 0
6 0
7 0
DIAGS ALARM
Operation
Diagnostics Menu
Model 146i Instruction Manual 3-75