Advertisement
Operation
Instrument Controls Menu
Choose Signal to Output
3-64
Model 146i Instruction Manual
Output
Actual Tflow
Pressure
Bench Temperature
Lamp Temperature
O3 Lamp Temperature
Intensity
Noise
The Choose Signal Type to Output screen displays a submenu list of the
analog output signal group choices. Group choices are Concentrations,
Other Measurements, and Analog Inputs (if the I/O expansion board
option is installed). This allows the user to select the output signal to the
selected output channel. The Concentrations screen is shown below. See
Table 3–4
below for a list of items for each signal group choice.
In the Main Menu, choose Instrument Controls > I/O Configuration >
●
Analog Output Config > Select Channel > Choose Signal To Output.
CHOOSE SIGNAL TYPE:
>CONCENTRATIONS
OTHER MEASUREMENTS
ANALOG INPUTS
OPER
MODE
CHOOSE SIGNAL -
SELECTED OUTPUT:
CURRENTLY: GAS CONC
SET TO: NONE
CHANGE VALUE
OPER
MODE
Zero % Value
0.0
User-set alarm min value
User-set alarm min value
User-set alarm min value
User-set alarm min value
User-set alarm min value
0.0
DIAGS ALARM
CONC
V1
?
SAVE
DIAGS ALARM
Full-Scale 100% Value
Total gas and zero flow
controller settings
User-set alarm max value
User-set alarm max value
User-set alarm max value
User-set alarm max value
User-set alarm max value
100.0
Thermo Fisher Scientific
Advertisement
Troubleshooting
