Advertisement
Operation
Diagnostics Menu
Set Analog Outputs
Instrument
Configuration
3-76
Model 146i Instruction Manual
TEST ANALOG OUTPUTS:
>ALL
VOLTAGE CHANNEL 1
VOLTAGE CHANNEL 2
VOLTAGE CHANNEL 3
VOLTAGE CHANNEL 4
VOLTAGE CHANNEL 5
VOLTAGE CHANNEL 6
OPER
MODE
The Set Analog Outputs screen contains three choices: Set to full-scale, set
to zero, or reset to normal. Full-scale sets the analog outputs to the full-
scale voltage, zero sets the analog outputs to 0 volts, and normal operation.
The example below shows the selected output state "ALL" is set to normal.
In the Main Menu, choose Diagnostics > Test Analog Outputs > ALL,
●
Voltage Channel 1-6, or Current Channel 1-6.
SET ANALOG OUTPUTS:
SETTING:
OUTPUT SET TO:
SET TO FULL SCALE
SET TO ZERO
RESET TO NORMAL
OPER
MODE
The Instrument Configuration screen displays information on the
hardware configuration of the instrument.
Note If the analyzer is in service mode, pressing
toggle it yes or no (with the exception of purchased options).
In the Main Menu, choose Diagnostics > Instrument Configuration.
●
DIAGS ALARM
ALL
NORMAL
DIAGS ALARM
on the item will
▲
Thermo Fisher Scientific
Advertisement
Troubleshooting
