Advertisement
Operation
Instrument Controls Menu
Analog Inputs
RS-232/RS-485 Selection
3-52
Model 146i Instruction Manual
The Analog Inputs screen allows the user to select the analog input signal
(none or analog inputs 1-8) that is tied to the selected streaming data item.
The selected item is shown by "<--" after it.
In the Main Menu, choose Instrument Controls > Communication
●
Settings > Streaming Data Config > Select Item > Analog Inputs.
The RS-232/RS-485 Selection screen allows the user to choose between the
RS-232 or RS-485 specification for serial communication.
Note Disconnect the serial cable before changing RS-232 and RS-485
selection to prevent damage to the connected equipment.
In the Main Menu, choose Instrument Controls > Communication
●
Settings > RS-232/RS-485 Selection.
RS-232/RS-485 SELECTION:
XXXXXX** WARNING
DISCONNECT THE
CABLES BEFORE CHANGING
THE
SELECTION!XXXXXX
OPER
MODE
DIAGS ALARM
LAMP TEMP
O3 LAMP TEMP
INTENSITY
NOISE
ANALOG INPUTS:
>NONE
ANALOG IN 1
ANALOG IN 2
ANALOG IN 3
ANALOG IN 4
ANALOG IN 5
ANALOG IN 6
OPER
MODE
DIAGS ALARM
**XXXXXXX
SERIALX X
X
TO CONTINUE
RS-232/RS-485 SELECTION:
CURRENTLY:
SET TO:
MAKE SURE THAT THE
IS OFF: PRESS
TOGGLE VALUE
OPER
MODE
DIAGS ALARM
▲
RS-232
RS-485 ?
CABLEXX
TO CONFIRM
Thermo Fisher Scientific
Advertisement
Troubleshooting
