Advertisement
Other Measurements
Analog Inputs
Thermo Fisher Scientific
The Other Measurements screen allows the user to select the output signal
that is tied to the selected field item. The selected item is shown by "<--"
after it. Items displayed are determined by the options installed. Note that
at this point, pressing
opposed to implemented changes. To change the selected record format
and erase record log file data, see
In the Main Menu, choose Instrument Controls > Datalogging Settings
●
> Select Content > Select Field > Other Measurements.
OTHER MEASUREMENTS:
>NONE
TARGET GFLOW
ACTUAL GFLOW
TARGET ZFLOW
ACTUAL ZFLOW
TARGET TFLOW
ACTUAL TFLOW
OPER
MODE
PRESSURE
BENCH TEMP
LAMP TEMP
O3 LAMP TEMP
INTENSITY
NOISE
The Analog Inputs screen allows the user to select the output signal (none
or analog inputs 1-8) that is tied to the selected field item. The selected
item is shown by "<--" after it. Note that at this point, pressing
indicates that these are proposed changes as opposed to implemented
changes. To change the selected record format and erase record log file
data, see
"Commit
Content" below.
In the Main Menu, choose Instrument Controls > Datalogging Settings
●
> Select Content > Select Field > Analog Inputs.
ANALOG INPUTS:
>NONE
ANALOG IN 1
ANALOG IN 2
ANALOG IN 3
ANALOG IN 4
ANALOG IN 5
ANALOG IN 6
OPER
MODE
indicates that these are proposed changes as
"Commit
Content" below.
DIAGS ALARM
DIAGS ALARM
Model 146i Instruction Manual
Operation
Instrument Controls Menu
3-45
Advertisement
Troubleshooting
