Advertisement
Gas Setup Menu
Gas Name
Thermo Fisher Scientific
PHOTOMETER MODE:
CURRENTLY:
SET TO:
OPER
MODE
The Gas Setup menu is used to configure flow for each gas. The Gas A, B,
or C menus assign a name, solenoid, and tank concentration to each gas.
The gas menus set the zero-air flow (span 0 flow) and the total flow output
for a maximum of five span settings for each gas. Additionally, the gas
menus manually set the zero-air and gas flows for each gas. Gas D, E, and F
are available if the six gas option is installed.
In the Main Menu, choose Flow Modes > Gas Setup.
●
GAS SETUP:
>GAS A
GAS B
GAS C
GAS D
GAS E
GAS F
OPER
MODE
GAS A SETUP:
>GAS NAME
GAS SOL
TANK CONC
ZERO
SPAN 1
SPAN 2
SPAN 3
OPER
MODE
SPAN 4
SPAN 5
MANUAL
The Gas Name screen is used to identify each gas. As initially delivered, the
instrument lists the gas standards using the letters A, B, C (and D, E, F if
the six gas option is installed). These characters can be changed to represent
PHTO OFF
PHOT INT
SAVING
CHANGE VALUE
SAVE VALUE
DIAGS ALARM
GAS A
GAS B
GAS C
GAS D
GAS E
GAS F
DIAGS ALARM
GAS A
100.000 PPM
2000 CCM
10.000 PPM
8.000 PPM
5.000 PPM
DIAGS ALARM
0.000 PPM
0.000 PPM
Operation
Gas Setup Menu
?
A
Model 146i Instruction Manual
3-21
Advertisement
Troubleshooting
