H3C S3100 Series Command Manual page 197

Max mac-address num is 4
Stored mac-address num is 0
Authorization is ignore
Ethernet1/0/2 is link-down
Port mode is AutoLearn
NeedtoKnow mode is disabled
Intrusion mode is no action
Max mac-address num is not configured
Stored mac-address num is 0
Authorization is ignore
Ethernet1/0/3 is link-down
Port mode is AutoLearn
NeedtoKnow mode is disabled
Intrusion mode is BlockMacaddress
Max mac-address num is not configured
Stored mac-address num is 0
Authorization is ignore
Table 1-2 Description on the fields of the display port-security command
Field
Equipment port security is enabled
AddressLearn trap is Enabled
Intrusion trap is Enabled
Dot1x logon trap is Enabled
Dot1x logoff trap is Enabled
Dot1x logfailure trap is Enabled
RALM logon trap is Enabled
RALM logoff trap is Enabled
RALM logfailure trap is Enabled
Disableport Timeout: 20 s
OUI value
Index
Ethernet1/0/1 is link-up
Port mode is AutoLearn
NeedtoKnow mode is needtoknowonly
Intrusion mode is BlockMacaddress
Port security is enabled on the switch.
The sending of address-learning trap messages
is enabled.
The sending of intrusion-detection trap
messages is enabled.
The sending of 802.1x user authentication
success trap messages is enabled.
The sending of 802.1x user logoff trap messages
is enabled.
The sending of 802.1x user authentication failure
trap messages is enabled.
The sending of MAC-based authentication
success trap messages is enabled.
The sending of logoff trap messages for
MAC-based authenticated users is enabled.
The sending of MAC-based authentication
failure trap messages is enabled.
The temporary port-disabling time is 20 seconds.
The next line displays OUI value.
OUI index
The link status of port Ethernet 1/0/1 is up.
The security mode of the port is autolearn.
The NTK (Need To Know) mode is ntkonly.
The intrusion detection mode is
BlockMacaddress.
1-4
Description