H3C S3100 Series Command Manual page 143

Hide thumbs Also See for S3100 Series:

Table of Contents

Use the undo gvrp registration command to restore the default GVRP registration mode on a port.

By default, the GVRP registration mode is normal.

Note that these commands only apply to trunk ports.

Related commands: display gvrp statistics

# Configure Ethernet1/0/1 to operate in fixed GVRP registration mode.

<Sysname> system-view

System View: return to User View with Ctrl+Z.

[Sysname] interface Ethernet1/0/1

[Sysname-Ethernet1/0/1] gvrp registration fixed

Chapters

Table of Contents