Fddi Stationmode Modify - 3Com SuperStack II 9300 Command Reference Manual

fddi stationMode
modify
3500
9000
9400
3900
9300
Modifies the stationMode, DAS or SAS, that is assigned to a specific port
number.
Valid Minimum Abbreviation
fd stationM m
Important Considerations
You cannot modify the stationMode when any of the ports in the pair
are part of a trunk.
Before the new stationMode takes effect, you must reboot your
system.
You can use this command to configure the same setting on multiple
ports simultaneously. When you specify multiple port numbers, the
system prompts you to choose the setting and then applies it to all of
the ports.
Options
Prompt Description
Ports FDDI station port for which you
want to set the stationMode
stationMode Mode of the FDDI port pair
selected to change
reboot Prompt to reboot the system if
you want the stationMode
changes to take effect

fddi stationMode modify

Possible Values [Default]
Any of the –
available ports
on the installed
FDDI modules
all
DAS SAS
SAS
y (yes) –
n (no)
247