3Com SuperStack II 9300 Command Reference Manual page 479

At each TTL setting, the system launches three UDP probe packets,
and the traceRoute display shows a line with the TTL value, the
address of the gateway, and the round-trip time of each probe. If a
probe answers from different gateways, the traceRoute feature prints
the address of each responding system. If no response occurs in the
3-second timeout interval, traceRoute displays an asterisk (
probe.
Other characters that can be displayed include the following:
— Network is unreachable
!N
— Host is unreachable
!H
— Protocol is unreachable
!P
— Fragmentation is needed
!F
— Unknown packet type
!<n>
To interrupt the command, press Enter.
Options
Prompt Description
Host name or Host name or IP address of the
IP address destination to which you want to
trace a route
IP Trace Route Example
Select menu option (ip): traceRoute
Enter host name/IP address [0.0.0.0]: 158.101.101.40
Press "Enter" key to interrupt.
Traceroute to 158.101.101.40: 30 hops max, 28 bytes packet
1 158.101.117.254
2 158.101.112.254
3 158.101.96.22
4 158.101.101.40
9 ms 22 ms 5 ms
8 ms 22 ms 8 ms
7 ms 22 ms 7 ms
7 ms 23 ms 6 ms
ip traceRoute
) for that
*
Possible Values [Default]
A valid host 0.0.0.0
name
IP address
479