Bridge Link Remove - 3Com SuperStack II 9300 Command Reference Manual

C 13: R
336
HAPTER ESILIENT

bridge link remove

3500
9000
9400
3900
9300
L
INKS
For CoreBuilder 9000: Applies to Layer 2 switching modules only.
Removes a previously defined resilient link pair. You can remove one or
more resilient link pairs with this command.
Valid Minimum Abbreviation
b l r
Important Consideration
Removing a link requires that you reboot the system.
Options
Prompt Description
Resilient link Index number of the resilient
index link pair that you want to
remove
Bridge Link Remove Example
Select menu option: bridge link remove
Select link index(s) (1-2|all|?): 2
The configuration of the ports will be modified.
The system must be rebooted to complete resilient link
configuration.
This may take a few minutes.
Are you sure you want to reboot the system? (n,y) [y]: y
Possible Values [Default]
Depends on –
configured links
? (for a list of
selectable link
indexes)