Ip Advancedtraceroute - 3Com SuperStack II 9300 Command Reference Manual

Prompt
Interface index Index number of the ICMP source IP
Numeric mode Whether the system shows hop
IP Advanced Trace Route Example (TTL value of 10):
Select menu option (ip): advancedTraceRoute
Enter host IP address [158.101.101.27]:
Enter maximum Time-to-Live (ttl) (1-255) [30]: 10
Enter Destination Port number (30000-65535) [33434]:
Enter the number of probes to be sent at each ttl level (1-10) [3]:
Enter time (sec) to wait for a response (1-10) [3]:
Enter the packet size (bytes) (28-4096) [28]:
Configure TRACEROUTE sourceAddress? (n,y) [y]:
Index
0
1
2
Select interface index {0-2|?} [0]:
Enter Numeric mode (disabled,enabled) [disabled]:
Press "Enter" key to interrupt.
Traceroute to 158.101.101.27: 10 hops max, 28 bytes packet
1 158.101.117.254
2 158.101.112.254
3 158.101.96.22
4 158.101.101.27
Description
address that you want to use
The system lists defined interfaces
and their indexes
addresses numerically or symbolically
Interface address
Best interface (default)
158.101.117.151
158.101.10.1
12 ms 7 ms
51 ms 9 ms
21 ms 15 ms
18 ms 90 ms

ip advancedTraceRoute

Possible
Values
A selectable
interface index
disabled
enabled
5 ms
7 ms
6 ms
80 ms
481
[Default]
0 (the
router
picks the
best
interface)
disabled