Management Ip Rip Mode - 3Com SuperStack II 9300 Command Reference Manual

C 5: O -O
174
HAPTER UT
management ip rip
mode
3500
9000
9400
3900
9300
-B M
F AND ANAGEMENT
On a per-interface basis, sets one of four RIP Version 1 (RIP-1) modes and
one of four RIP Version 2 (RIP-2) modes on the system.
Valid Minimum Abbreviation
m ip ri m
Important Considerations
The CoreBuilder 3500 supports RIP Version 1 as well as RIP Version 2.
For each interface, you select a RIP Version 1 mode and a RIP Version 2
mode. The default RIP Version 1 mode for all platforms is
default RIP Version 2 mode for the CoreBuilder 3500 is
The four available RIP modes are as follows:
Disabled — The interface ignores all incoming RIP packets and
does not generate any RIP packets of its own.
Learn — The interface processes all incoming RIP packets, but it
does not transmit RIP updates. This is the default RIP mode.
Advertise — The interface broadcasts RIP updates, but it does not
process incoming RIP packets.
Enabled — The interface broadcasts RIP updates and processes
incoming RIP packets.
Options
Prompt Description
IP interfaces Index number of the interface for
which you want to set the RIP
mode
RIP mode, Selected RIP Version 1 mode that
Version 1 determines how the interface
handles RIP 1 packets and
updates
RIP mode, How the interface handles RIP 2
Version 2 packets and updates
learn
disabled
Possible Values [Default]
Selected Previous
interfaces entry, if
applicable
all
? (for a list of
selectable
indexes)
disabled learn, or
current
learn
value
advertise
enabled
disabled disabled, or
current
learn
value
advertise
enabled
. The
.