Module Display - 3Com SuperStack II 9300 Command Reference Manual

module display

3500
9000
9400
3900
9300
Generates software and hardware revision numbers, module status
information, and warning messages for certain module conditions.
Valid Minimum Abbreviation
mo d
Important Considerations
The module display provides the configuration information for the
module to which you are currently connected. To display configuration
information for another module, disconnect from the current module
through the Enterprise Management Engine (EME) and then connect
to the module that you want to display.
After you have logged in to the EME, you can access the module that
you want to manage.
Diagnostic messages appear in the display only if a module fails any of
the tests at start-up.
Fields in the Module Display
Field
24 port Gigabit
Switching Fabric
3C number
Built
Diagnostics
Memory size (AP, FP,
Flash, Buffer)
Module ID
Rev
Serial
Slot
System name
System up time
Time in service
Version
Description
32-character alphanumeric name that uniquely identifies
this module
Each module's 3Com 3C product identification number
Date and time when this software version was built
Whether a module has passed or failed diagnostics.
Additional diagnostic messages describe a failure.
Memory capacities of the processors
ID number that the system assigns to that module
Unique number assigned to the hardware build by 3Com
Each module's unique serial number
Location of the module in the chassis (slot.subslot)
Name of the system
Time that this module has been up and running
Total operational time since the module was
manufactured
Software release number
module display 129