Bridge Spanningtree Stphellotime - 3Com SuperStack II 9300 Command Reference Manual

bridge spanningTree
stpHelloTime
3500
9000
9400
3900
9300
Sets the time between configuration messages that the bridge generates
if it is operating as the root bridge. The current value is shown in the
bridgeHelloTime field of the
Valid Minimum Abbreviation
b sp stph
Important Considerations
If the probability of losing configuration messages is high, shorten the
time to make the protocol more robust.
If the probability of losing configuration messages is low, lengthen the
time to lower the overhead of the algorithm.
The recommended Hello time is 2 seconds.
Although the possible range for stpHelloTime is 1 – 10, the available
range is constrained by the following inequality:
stpMaxAge >= 2 x (stpHelloTime + 1 second)
Options
Prompt Description
STP hello time Time (in seconds) between
configuration messages from
the root bridge

bridge spanningTree stpHelloTime

.
bridge display
Possible Values [Default]
1 – 10 seconds
263
2 (factory
default), or
current value