3Com SuperStack II 9300 Command Reference Manual page 719

Prompt Description
Rate limit type Type of rate limit:
none (no rate limit)
receivePort (a rate limit
on the specified ports)
aggregate (the
bandwidth for all ports
specified for the
associated classifier)
Service level Service level for the
conforming packets.
Drop causes the system to
drop all traffic on all ports
that are associated with
the classifier/control.
Loss eligible Whether conforming
packets are loss-eligible. A
loss-eligible packet can be
dropped if the transmit
queue for which it is
destined exceeds its
threshold.
Excess packets For receivePort or
service aggregate rate limit types,
service level for excess
packet.
Excess loss For receivePort or
eligible aggregate rate limit types,
whether excess packets
are loss-eligible.
How rate limit For receivePort or
is expressed aggregate rate limit types,
format of the rate limit.
Rate limit value For receivePort or
aggregate rate limit types,
number of Kbytes/sec or a
percentage.
0 makes all packets excess
packets.
qos control modify
Possible Values [Default]
none Current rate limit
type
receivePort
aggregate
For a rate Current service
limit of level
receivePort or
aggregate:
high, best
(best effort),
or low
For a rate
limit of none:
high, best,
low, or drop
y (yes) Current value
n (no)
high Current value
best
low
drop
y (yes) Current value
n (no)
KBytes/sec KBytes/sec
percentage
0 – 65434 –
KBytes/sec
0 – 100
percent
719