3Com SuperStack II 9300 Command Reference Manual page 209

Field Description
linkStatus Boolean value that indicates the current state of the physical
link for this port (either enabled or disabled).
macAddress MAC address of this port.
multiCollisions Number of frames that have experienced from 2 to 15
(3500, 3900 and consecutive collisions before successful transmission from this
9000 Layer 3) port. If a frame also experiences a collision on the 15th attempt,
it is dropped and the excessCollision count is increased by 1.
noRxBuffers Number of frames that were discarded because no buffer space
was available.
oversized Number of frames received by this port that were longer than
(3900, 9000 1518 bytes.
Layer 2, 9300 and
9400)
paceAccess Whether PACE
(3900 and 9000 for this port.
Layer 2)
portLabel User-defined label name. The maximum length of the string is
32 characters, including the null terminator.
portState Current software operational state of this port. Possible values
are on-line, off-line, partitioned, tx-fault, and
config-error. The value on-line appears when the port
is both enabled and connected to a cable. The value
partitioned appears when the port has been disabled by
the ethernet port monitoring feature.
portType Specific description of this port's type. Values for each port
type: 10/100BASE-T(RJ45), 100BASE-FX (SC),
1000BASE-SX (SC), 1000BASE-LX (GBIC),
1000BASE-SX (GBIC), Backplane (9000).
reqFlowControl Configurable parameter that sets the flow control option (when
autonegotiation is disabled). When autonegotiation is enabled,
flow control values are ignored.
reqPortMode Port mode on Ethernet ports that have port mode options
(when autonegotiation is disabled). When autonegotiation is
enabled, port mode values are ignored.
requestedState Configurable parameter that is used to enable and disable this
port. The default is enabled.
runts Number of frames received by this port that were shorter than
(3900, 9000 64 bytes.
Layer 2, 9300 and
9400)
rxBroadcast Number of broadcasts received by this port.
(3900, 9000
Layer 2, 9300 and
9400)
® Interactive Access is enabled or disabled
ethernet detail 209