Ip Ospf Interface Delay - 3Com SuperStack II 9300 Command Reference Manual

C 19: O
552
HAPTER PEN
ip ospf interface
delay
3500
9000
9400
3900
9300
S P F (OSPF)
HORTEST ATH IRST
For CoreBuilder 9000: Applies to Layer 3 switching modules only.
Sets the OSPF interface transmit delay.
Valid Minimum Abbreviation
ip o i del
Important Considerations
The system adds the value of the transmit delay to all link state
advertisements (LSAs) that it sends out to the network. Set the
transmit delay according to the link speed: use a longer transmit delay
time for slower link speeds.
The transmit delay must be consistent throughout the autonomous
system.
Options
Prompt Description
IP interface Index number of one or more
interfaces for which you want
to set the transmit delay
Transmit Delay (in seconds) that you
delay want to assign to the specified
interface
Possible Values [Default]
One or more all (factory
valid IP interface default), or
index numbers current value
all
? (for a list of
selectable
indexes)
1 – 65535 seconds 1 (factory
default), or
current value